updated: 2018-12-12 c
These are either parts that are no longer available from Fiat (replicas) or improved versions.
Lamp relay set
For relieving the load on the steering column switch and for more light output
(2 versions: M1 and M2)
Hood cover gasket – new part
246.- €
Order no.: B-DI-0016
For do-it-yourselfers:
Camshaft tool kit new
Normally these parts for the Barchetta are only available separately – we have now put them together usefully in a complete kit:
- Camshaft brackets,
optionally for M1 (i.e. aluminium intake bridge) or for VIS/M2
(When ordering, please specify the desired version or chassis no.);
the set can also be supplied with both bracket sets for an extra charge - tension pulley spanner
- four longer screws for mounting the brackets
- handy storage case
Order no.: b-wzg-m1 / b-wzg-m2
Sleeve fuel tank vent valve
These sleeves are usually responsible for the fuel tank in the car, as they are hardened due to age. These parts are no longer available from Fiat.
Order no.: B-DI-0015
mounting instruction: tankmuffenmontage
Retaining clip passenger airbag cover
These clips break, for example, when the dashboard is removed to replace the heat exchanger.
Order no.: B-KAR-010
Suspension strut bearing top
Order no.: B-FW-012
Suction hose for vehicles with aluminium suction bridge
New part, very good rubber quality
Order no.: B-DI-0012
Heat protection plate for Euro 2 vehicles (i.e. without pre-cat)
high-strength, rolled aluminium sheet, CNC laser-cut, without sharp corners or edges (no breaking or tearing) inclusive special mounting nuts ( kepse )
Order no.: B-AUS-004
Heat shield for vehicles Euro 3 (with pre-cat)
high-strength, rolled aluminium sheet, CNC laser-cut, without sharp corners or edges (no breaking or tearing) inclusive special mounting nuts ( kepse )
Order no.: B-AUS-013
Window slideway
No more breaking of the guide noses on the window lifter.
Order no.: B-KAR-002
Suction hose for vehicles with plastic airbox (VIS/M2)
Order no.: B-DI-0013 not on stock
Radiator hose bottom
not on stock
Radiator hose top
not on stock
Hose bend suction pipe – airbox
(not at the throttle body) not on stock
Radiator traverse
aluminium CNC-milled and plastic-coated
Order no.: B-CAR-CONC-009
Brake force regulator rear right with spoon, for Barchette without ABS
( No factory doens´t produce them at the moment ! – new parts on stock by us )
Order no.: B-BR-0030
Brake force regulator rear left with spoon, for Barchette without ABS.
The right-hand regulator is rebuilt in our house by means of an adapter for use on the left. New parts are used as basis.
Order no.: B-BR-0029